How to ensure the product quality when using polyether amine

2021-06-02 09:15:53

When using polyether amine, we need to pay special attention to ensure the quality of the product, ensure its purity, and not be mixed by other substances. Therefore, when we use this kind of curing agent, we must pay attention to the following matters, so that we can better ensure the use effect of the product.

The floor materials with this function are very exquisite. Most of them use the main materials with solvent-free and high resin content, together with transparent colorless, low viscosity and non volatile gas curing agent. Moreover, the flexible function of the curing agent is needed to slow down the strong internal stress of the main materials with high solid content, and defeat the glass flower crack caused by its brittleness, Make the floor fully reflect the high-density waterproof and anti-corrosion characteristics of pure epoxy resin, and ensure moderate softness and hardness, not only prevent cracking but also not easy to scratch.

Because the new floor plan concept and 1, polyether amine transparent colorless, viscosity is very low. Transparent colorless: not easy to change color, meet the needs of polymer floor for glory and beauty. Low viscosity: both coating and adhesive film are very thin, suitable for solvent-free, high sand content floor. The proportion of rubber sand of sand pressing floor can be 1:15, which can also make the sand layer very full and seamless.

When using polyether amine, we need to pay special attention to ensure the quality of the product, ensure its purity, and not be mixed by other substances. Therefore, when we use this kind of curing agent, we must pay attention to the following matters, so that we can better ensure the use effect of the product.

1. Before using polyether amine, the oil, dust and rust on the contact surface of the adhesive must be cleaned.

2. Suitable dosage can be added in low temperature, humid environment or under water.

3. Some fillers can be added as required.

4. Polyether amines should be protected from rain, sun and moisture during transportation.

5. Store in cool and dry condition, away from fire, strong acid, strong alkali and strong oxidant.

6. The storage period is 12 months from the production date of polyether amine under the transportation and storage conditions that meet the standard.