It is generally believed that this is the main cause of fabric yellowing or color change of cloth, and the method of acylation and etherification of primary amino group is adopted to produce modified amino silicone oil or add antioxidant in order to reduce its yellowing or color change, but it is at the cost of sacrificing the hand feeling of finished fabric. In fact, the above methods can not completely eliminate the color change of finished fabric. As we know, when the dyed fabric is shaped at high temperature, the dye molecule activity intensifies, and some dyes that are not firmly bound will be separated from the fiber heat transfer or sublimation. If the dye is not blocked when it diffuses to the outer layer (including the fabric surface and air), the color after the fabric will mainly reflect the color light of the surface dye; if it is blocked (silicone oil film formation), the dyes that have heat transfer will Concentrated on the surface of the fabric.

Anionic surfactants have excellent performance in decontamination, but they are often combined with non-ionic surfactants to get better deinking effect. The anionic surfactants have good foaming and degreasing properties. The nonionic surfactants present nonionic state in aqueous solution and have high stability. When the non-ionic surfactant and the anionic surfactant are used together, the colloidal particles are negatively charged and repel with electricity, forming a stable dispersion system, which is conducive to the separation and removal of ink and fiber.

The compounding and Synergistic Technology of surfactants in our country is relatively backward, so we should strengthen the research on the basis and application technology in this field. The technology of multi-functional synergism, solubilization, emulsification, dispersion and anti caking should be paid more attention. Compounding technology is also the key to promote the application of special surfactants in leather making. The results show that the emulsification, dispersion and wettability of surfactants can be improved by adding 10-6 grade special surfactants.

Alkyl polyglucosides (APG) is a complex mixture of alkyl monoglycosides, diglucosides, triglucosides and oligoglycosides, which is generally called alkyl polyglucosides (APG). It is a product obtained by the loss of a molecule of water under the catalysis of strong acid from the hemiacetal hydroxyl and fatty alcohol hydroxyl of glucose.

The trend of surfactant's steady growth in the world provides a good external environment for the development and expansion of cosmetics industry, and the requirements for product structure, variety, performance and technology are also higher and higher. Therefore, it is necessary to systematically develop safe, mild, biodegradable and special surfactants to provide theoretical basis for the development and application of new products. To focus on the development of glycoside surfactants, we can develop a variety of polyols and alcohol surfactants; systematically research and develop soybean phospholipid surfactants; develop a series of products of sucrose fatty acid vinegar, strengthen the research of compounding technology, and expand the application range of existing products.

APG, for short, is a non-ionic surfactant, characterized by environmental protection, small irritation, no pollution to the environment. Compared with other surfactants, APG has the advantages of low surface tension, strong decontamination ability, stable in strong alkali environment, and stable use in combination.

Anionic surfactants are common soap groups in Japanese cleansers. I believe that many people often see the word "soap base" and often hear people say not to use soap base cleanser, because it is not gentle, but what is soap base? This has to start from the chemical reaction formula of making "soap": fat + alkali = soap + glycerin. Here we generally think that fat is fatty acid glyceride. In the alkaline condition, the sodium fatty acid produced by heating hydrolysis is soap.

The characteristics of surfactants include: anionic, cationic, non-ionic, amphoteric surfactants. Among them, anionic surfactants include: carboxylates, sulfonates, sulfates, phosphates; cationic surfactants include: aliphatic amines and alkyl cyclic nitrogen-containing heterocyclic salts; non-ionic surfactants include: polyoxyethylene and fatty acid polyol esters; amphoteric surfactants are based on their middle cation According to the structure of ion part, amphoteric surfactants can be divided into betaine, amino acids, lecithin and imidazoline derivatives; according to the structure of anion part, they can be divided into carboxylates,

Alkyl glucoside, as a new non-ionic surfactant, has the advantages of low surface tension, fine foam, rich and stable, strong detergency and strong compatibility. The product is non-toxic, non irritating and biodegradable, so it can be widely used in detergents, detergents, cosmetics, food and medicine.

Alkyl glycosides in skin cleansing products, because of APG has good safety, mild, decontamination, foaming and foam stability, compatibility and rheological behavior. Therefore, it is often used in bath liquid and facial cleanser for skin cleaning. Add a small amount of APG to the bath formula as a conditioner, which will make the skin feel more comfortable after washing.

As a new non-ionic surfactant, alkyl glycosides have many unique advantages. For example, it has obvious synergistic effect with anionic surfactants, abundant foam, little irritation to skin, non-toxic and good biodegradability, etc. it makes alkyl glucosides have certain superiority in the preparation and application of daily chemical products, so it has been widely applied.

The compatibility test and performance test between silicone structural adhesive and contact material must be carried out carefully before purchase. If there is no such report, the Contractor shall be urged to immediately entrust a testing agency with such qualification to carry out special test, and the qualified test can only be used.

Polyetheramine has the characteristics of low viscosity, good permeability, anti yellowing and weather resistance. Its FRP products have good flexibility and anti fatigue properties. It's hard to satisfy the general epoxy. Therefore, in large-scale epoxy FRP products, polyether amine is basically used as curing agent of epoxy resin. For example, the blades of wind turbines are generally about 50m long, and now they can be more than 80m long. In all-weather conditions, the service life is required to be more than 20 years. Due to the special requirements of this environment, polyether amine or polyether amine compound curing agent is widely used in the world. Of course, because polyether amine has this characteristic, other composite materials will also choose polyether amine in many occasions, such as yachts, skis, fishing rods and other products with good fatigue resistance.

In the promotion of polyether amines, we should pay attention to the interactive marketing of channels, regions and prices. For different regions, different levels of agents to give different price positioning and profit line. On the whole, the promotion concept is the principle of low price, high quality, master the main channel and regional volume.

Polyether amine technology is often used as a kind of foaming agent after polyether amine is generated. Of course, it is because of the existence of such products that we can achieve a good effect when using products. However, when we use it in styrofoam, what should we pay attention to? Let's have a simple understanding.

Oxygenation principle of surfactant: the saturated solubility of oxygen in aquaculture water can be increased by adding surfactant. According to hydrate formation theory and bimembrane theory, due to the low solubility of oxygen in water, water oxygenates in water generally form at the gas-liquid interface first, and then slowly diffuse from the gas phase to the liquid phase. Due to the solubilization of surfactants, a large amount of oxygen is dissolved in the surfactant micelles formed in the aqueous solution, so that the formation of water oxygenate in the surfactant aqueous solution can not only occur at the gas-liquid interface, but also in the water body, reducing the formation time of water oxygenate, and improving the oxygen in the water body Solubility in.

Surfactant is a kind of substance which can make the interface state of solution system change obviously. Surfactants have fixed hydrophilic and lipophilic groups, and can be arranged on the surface of the solution. The molecular structure of surfactant is amphiphilic, one end is hydrophilic group, the other end is hydrophobic group.

Generally, the toxicity of amino terminated polyether in oral cavity or in contact with skin, eyes and mucous membrane can be ignored, so there is no need for personal protective measures in use. But because its alkalinity can irritate skin and eyes, it is necessary to wear safety glasses, gloves and other protective articles during operation.

Surfactants are substances that can significantly reduce the surface tension and interfacial tension of liquids. Their molecules are composed of polar hydrophilic group and nonpolar hydrophobic group. The common hydrophilic group is carboxyl group, sulfuric acid ester, sulfonic acid group, amino group, quaternary ammonium group and hydroxyl group, while the hydrophobic group is represented by long-chain alkane and aromatic hydrocarbon. Because of their hydrophilic and lipophilic amphiphilic properties, they can change the surface properties of cleaning solution during chemical cleaning, making it have lower surface tension, better wettability and foaming. According to the different charge of the surface active part, surfactants can be divided into four categories: anionic, cationic, non-ionic and amphoteric.

With the passing of time and the development of science, our knowledge of polymer flooring maintenance materials has also been fundamentally changed. More and more users begin to pay attention to the function and useful concept of products. The new flooring no longer excessively seeks the needs of light, smoothness and endless hardness of polymer flooring, but also needs the appearance of light, soft and hard without cracking Pay attention to meet the functional needs of the owners.